Skip to content
Back to the poster maker

Print a Rasterbator PDF at Actual Size (100%)

A poster PDF already contains its intended paper size. The print dialog should send each PDF page to one sheet at that size. Options such as Fit, Shrink, or Scale to fit resize every tile, so the assembled poster can come out too big or too small.

The Block Poster Maker shows the intended paper and finished dimensions before you download the PDF. Load the same paper size in the printer and select it in the dialog. A4 and US Letter are similar, but they are not interchangeable.

Use Actual Size or 100%

In the print dialog:

  • choose the paper size shown in the poster summary;
  • select Actual Size, 100%, or your viewer's equivalent for printing without scaling;
  • turn off Fit, Shrink oversized pages, Scale to fit, and borderless expansion unless you have deliberately tested them;
  • leave Pages per sheet at 1 and switch off booklet printing;
  • print one-sided, and confirm the orientation matches the PDF.

Labels vary between PDF viewers and printer drivers. If both the application and the printer driver have a scale control, leave each at 100%.

Where to find the setting

The wording depends on the app:

  • Adobe Acrobat Reader on Windows or macOS: choose Actual size under Page Sizing & Handling. Do not choose Fit or Shrink oversized pages.
  • Preview on macOS: set Scale: 100% and leave Scale to Fit off.
  • Evince on GNOME Linux: set Page Scaling to None.
  • Okular and other Linux PDF viewers: keep the document at its original size and turn off Fit to page. Check printer Properties if the main dialog does not show the scaling options.
  • Chrome or Edge: set Scale: 100% and make sure the browser is not automatically fitting the page. When the controls are unclear, save the PDF and open it in a dedicated PDF viewer instead.

Some printer settings use names such as Zoom, Reduce/Enlarge, or Expansion. Leave those off or at 100% as well. Changing print quality from 300 to 600 dpi can affect detail, but it does not correct the physical print size.

Check the print scale

In paper settings, download the printer margin test under Margins. Print it with the same viewer, printer, paper, orientation, and settings as the poster. Measure the reference line: it should be 100 mm or 4 in, according to your selected unit. For paper with a short side under 125 mm or a long side under 175 mm, use another PDF with a known-length reference. If the measurement is wrong, check the paper size and scaling; do not change the poster dimensions to compensate.

If the page is clipped or shifted

Most home printers cannot print to the edge. If marks are clipped on a poster test page, increase the printer margin and export again. Do not choose Fit, which shrinks every sheet. Borderless printing can enlarge or crop a page, so test it first.

Before printing every page

  1. Confirm that the PDF, the print dialog, and the paper in the tray are all the same size.
  2. Select Actual Size, 100%, or None, and disable automatic scaling.
  3. Set one page per sheet, and turn off two-sided and booklet printing.
  4. Print the margin test or another known-length reference and measure it.
  5. Print one poster page and check its margins, marks, and labels.
  6. Print the remaining pages with the same settings, then assemble the labeled sheets.