How to calculate how many sheets a poster needs
- Choose the sheet count or the finished size. Size by sheets starts from the paper grid and calculates the finished size; Exact poster size starts from the width and height you need and calculates the sheets. There is no image to match yet, so nothing is cropped, stretched or rotated.
- Choose the printer paper and how sheets meet. Pick A4, A3, A2, US Letter, US Legal, US Tabloid or a custom size, then set the margin and the join method.
- Read the sheet plan. The result shows the finished size, the sheet grid, the sheet total and the paper it needs, with a preview of the assembled sheets.
The result updates as you type. Nothing is uploaded, and the calculator never asks for an image.
Worked examples
Every number below comes from the same layout engine that Rasterbator uses to export the poster PDF. These examples use Exact poster size.
600 × 900 mm on A4
With the default 10 mm margin and a 2 mm overlap, Auto chooses landscape, and a 600 × 900 mm poster needs 15 sheets: 3 columns × 5 rows. The unique area on a full A4 sheet is 277 × 190 mm. The first and last columns each keep 161.5 mm, and the first and last rows each keep 165 mm. The poster is centred on the sheet grid, so those four edges are trimmed back to the finished poster line.
Portrait paper needs 16 sheets (4 × 4) for the same finished size.
24 × 36 in on US Letter
The same rules on US Letter give landscape, 15 sheets, 3 columns × 5 rows. One full sheet carries 259.4 × 195.9 mm of the poster. The first and last columns keep 175.1 mm, and the first and last rows keep 163.35 mm.
A poster smaller than one sheet
A 100 × 150 mm poster on A4 is 1 sheet. It keeps the full 100 × 150 mm and trims 45 mm of blank paper on each side and 63.5 mm above and below. A finished size that fits inside one sheet is still measured by its exact perimeter, not by the sheet.
Margins, overlap and gaps
Margin. The margin is printer-safe blank space around every sheet: 10 mm by default. It is what keeps artwork away from the edge a printer cannot reach, and it is not part of the poster. A smaller margin gives each sheet a larger unique area and can reduce the sheet count, so the calculator shows the margin it used.
Overlap. With joined edges, each sheet repeats a 2 mm strip of its neighbour along the right and bottom edge, inside the margin. You trim one edge, place the sheet over its neighbour and glue or tape along the strip. Overlap never adds sheets and never changes the finished size; it only adds repeat inside the margin that is already there.
Gaps. With gaps, panels keep a blank strip between them. An exact size keeps its perimeter: a 600 × 900 mm poster with 5 mm gaps still measures 600 × 900 mm, and the image panels sit 5 mm apart inside it. A fixed sheet grid is the other way round, because there the grid decides the size and the gaps add to it. Either way the outer border can match the gap or stay at zero.
Why the first row or column is also trimmed. The requested size is exact. When it is not a whole number of sheets, the calculator centres the poster on the smallest complete sheet grid. Splitting the spare paper between the first and final row or column gives all four corners the same size. That is why an edge can keep a 161.5 mm sliver rather than a full sheet.
Print at Actual Size
Print the poster PDF at 100% / Actual Size, without Fit to page. Scaling changes the finished dimensions. Enable cut guides and page labels when available. See the assembly guide for joining sheets and the Actual Size guide for checking scale.