Skip to content
Back to the poster maker

What Image Resolution Do I Need?

Start with the largest original image you have, but do not assume every poster needs 300 pixels per inch (PPI). A photo held in your hands needs more detail than a poster that will be seen from across a room, and most wall posters sit somewhere between the two.

For a tiled poster, the useful question is how many image pixels will cover each inch of the finished print. Rasterbator reports this as the effective resolution once you have chosen the poster size and how the image fits.

Start with pixels, not the file's DPI setting

Image files often carry a DPI number such as 72, 96, or 300, and it says almost nothing about how sharp your poster will look. What matters is the pixel dimensions, something like 3000 × 4000, together with the size you print them at.

PPI counts the image pixels used per printed inch. Printer DPI describes how a printer places ink or toner dots. A printer advertised as 1200 DPI cannot add missing detail to a small image.

Dividing the poster across more sheets does not add detail either. The same source pixels simply end up spread across more paper.

Use effective resolution as your guide

Effective resolution is the PPI at the finished print size, accounting for any cropping. A 3000 × 4000 pixel image printed at 60 × 80 cm works out to about 127 PPI. That can work well as wall art viewed from a distance, even though it is below 300 PPI.

The closer people can stand, the more pixels the print needs. Set a finished size and viewing distance below to see the practical PPI range that distance supports:

Poster resolution and viewing distance

Finished size

Viewing distance1.10 m

Suggested: 1.10 m, about one poster diagonal.

Use the closest distance at which people will read or inspect important detail.

Practical resolution range
100–145 PPI
20/20 vision reference · 1 arcminute
80 PPI@ 1.10 m
Source image · recommended range
2,400 × 3,600 px8.64 MP · 100 PPI
3,480 × 5,220 px18.17 MP · 145 PPI

Apparent field of view

Vertical viewing angle: 45.1°1.10 m
Illustrative vertical field · 60°60.96 × 91.44 cm poster at 1.10 m, shown at its apparent size.

About the numbers

One arcminute (1/60°) is an approximate reference for 20/20 vision. The pixel threshold is a geometric reference; the practical range leaves room for closer inspection and fine detail.

These ranges are a place to start rather than a pass-or-fail test. The one-arcminute column is geometry: the PPI at which one printed pixel subtends about one arcminute, roughly the minimum angle of resolution for 20/20 vision. The practical target column is Rasterbator guidance built on that geometry, because people do walk closer than the intended distance:

Intended viewing distanceOne-arcminute referencePractical target
0.3 m (1 ft)291 PPI220–300 PPI
0.5 m (1.6 ft)175 PPI180–240 PPI
0.75 m (2.5 ft)116 PPI120–180 PPI
1 m (3.3 ft)87 PPI100–150 PPI
1.5 m (5 ft)58 PPI80–120 PPI
2 m (6.6 ft)44 PPI60–100 PPI
3 m (10 ft)29 PPI40–75 PPI
5 m (16 ft)17 PPI30–60 PPI

Choose the row by the closest distance anyone is likely to stand, not the distance you expect the poster to be seen from most often. If people can walk right up to it, some of them will. These practical ranges are Rasterbator guidance, not an ISO or manufacturer standard.

The calculator interpolates between those anchors. A poster's size only sets its suggested distance: a 60 × 90 cm print has a diagonal of about 1.1 m, and from that distance the practical range is roughly 100–145 PPI. How the poster is divided into sheets changes nothing here; the effective PPI you actually get depends only on the retained source pixels and the finished size.

Some images need more detail than others

Two posters at the same PPI can look different. Aim toward the higher end of a range when the image contains:

  • small text, maps, or diagrams;
  • thin lines and sharp geometric edges;
  • faces or photographs people will examine closely.

Bold shapes, large lettering, illustrations, and deliberate halftone or dither styles are often more forgiving, and a lower-resolution source can suit a graphic poster well. A style changes how softness looks; it cannot bring back detail that was never in the file.

Also check for JPEG compression, noise, and blur in the source. A high pixel count alone does not guarantee a sharp print.

Set the image fit before judging resolution

When the image and the poster have different proportions, the fit setting decides how many of your pixels actually get used.

  • Show the whole image keeps every edge, possibly leaving unused space on two sides of the poster.
  • Fill the poster covers the whole area but crops part of the image, which can lower the effective resolution compared with showing the whole image.

Set the final poster size and fit first, then read the effective resolution in the preview. The calculation accounts for the crop as well as the original pixel dimensions.

If the effective resolution is too low

Work through these in order:

  1. Find the original photo or the largest available export. Avoid thumbnails, screenshots, and images compressed by messaging apps.
  2. Make the finished poster smaller; fewer inches means more pixels per inch.
  3. Reconsider Fill the poster if the crop removes a large part of the image.
  4. Choose a treatment such as halftone dots when it suits the design.
  5. Print one representative sheet and view it from the intended distance.

Upscaling software can make the file bigger and may smooth a few edges, but it cannot guarantee real detail that was absent from the source. Judge the printed result itself, not the new pixel count.

Check the poster before exporting

  1. Select the best source file you can find.
  2. Choose the finished size, and decide between showing the whole image and filling the poster.
  3. Check the effective PPI and any resolution warning in the preview.
  4. Look at important areas such as faces, lettering, and fine edges.
  5. If you are unsure, test-print one sheet at Actual Size / 100%.

The on-screen preview is good for judging composition and style. A printed sample is still the most reliable way to assess your printer, paper, source image, and real viewing distance all at once.

Common questions

Do I need 300 PPI for every poster?

No. Around 300 PPI suits photographic prints that get held and studied up close. A large wall poster is normally seen from farther away, so it can look sharp at a considerably lower effective PPI.

Does printing across more pages improve resolution?

No. Tiling makes the finished poster larger; the source pixels stay the same and simply spread thinner.

Can a high-DPI printer fix a low-resolution image?

No. Printer DPI and image PPI describe different things. The printer can place ink precisely, but it cannot recover detail that is not in the file.

Should I trust the image's 72 DPI or 300 DPI label?

Not by itself. Check the pixel dimensions, then the effective PPI at your actual finished size.

Where do these PPI ranges come from?

The one-arcminute column is a geometric reference: at the listed distance, one printed pixel subtends about one arcminute, the approximate minimum angle of resolution for 20/20 vision. The practical ranges are Rasterbator guidance built on that geometry and on common close-view printing targets. They are not ISO, Fogra, or printer-manufacturer limits, and they do not guarantee a result.

Make the poster

Choose your image, set the finished size, and check the effective resolution in the Rasterbator poster maker. For the complete print workflow, see how to print a large image on multiple pages.

For a worked example with a 27 × 40 in poster, see how to print a movie fan poster at home.

Further reading